Home > LNP Stat Kon >

S-Plastic Stat-kon AD000Z LNP* Stat-Kon AD000Z is a compound based on ABS resin with carbon powder. Grade characteristics: a

Product Categories

Valox Plastic [1]
Ultem PEI Resin [197]
Cycoloy PC ABS [9]
Xenoy Resin [2]
Cycolac ABS [173]
Geloy Resin [110]
Colorcomp [20]
LNP Faradex [37]
S-Plastic Lubricomp [506]
LNP Stat Kon [308]
S-Plastic Thermocomp [705]
Plastic Resin Pellets Bulk [113]
Verton Plastic [106]

SAMTION INTERNATIONAL LIMITED

Contact Now

S-Plastic Stat-kon AD000Z LNP* Stat-Kon AD000Z is a compound based on ABS resin with carbon powder. Grade characteristics: a

Name: SPlastic Statkon AD000Z LNP StatKon AD000Z is a compound based on ABS resin with carbon powder Grade characteristics a
Brand: S-Plastic Stat-kon
Price: 1 USD

Best S-Plastic Stat-kon AD000Z LNP* Stat-Kon AD000Z is a compound based on ABS resin with carbon powder. Grade characteristics: a wholesale

Brand Name : S-Plastic Stat-kon

Model Number : AD000Z

Certification : COA/ICP Test/Rohs/MSDS

Place of Origin : ——

MOQ : 100KG

Price : *USD

Payment Terms : L/C, T/T, Western Union, MoneyGram

Supply Ability : To be negotiated

Delivery Time : To be negotiated

Packaging Details : 25KG/bag

Melt Volume Rate, MVR at 260°C/2.16 kg : ？？？

UL Recognized, 94HB Flame Class Rating (3) : ？？？

Contact Now

S-Plastics Stat-kon AD000Z resin is LNP* Stat-Kon AD000Z is a compound based on ABS resin with carbon powder. Grade characteristics: a statically conductive extrusion grade.

Property

TYPICAL PROPERTIES (1)
MECHANICAL	Value	Unit	Standard
Tensile Stress, yld, Type I, 5 mm/min	41	MPa	ASTM D 638
Tensile Stress, brk, Type I, 5 mm/min	37	MPa	ASTM D 638
Tensile Strain, yld, Type I, 5 mm/min	1.9	%	ASTM D 638
Tensile Strain, brk, Type I, 5 mm/min	2.5	%	ASTM D 638
Tensile Modulus, 50 mm/min	2770	MPa	ASTM D 638
Flexural Modulus, 1.3 mm/min, 50 mm span	4280	MPa	ASTM D 790
Tensile Stress, yield, 5 mm/min	41	MPa	ISO 527
Tensile Stress, break, 5 mm/min	37	MPa	ISO 527
Tensile Strain, yield, 5 mm/min	1.9	%	ISO 527
Tensile Strain, break, 5 mm/min	2.7	%	ISO 527
Tensile Modulus, 1 mm/min	2680	MPa	ISO 527
Flexural Modulus, 2 mm/min	2570	MPa	ISO 178
IMPACT	Value	Unit	Standard
Izod Impact, unnotched, 23°C	396	J/m	ASTM D 4812
Izod Impact, notched, 23°C	34	J/m	ASTM D 256
Instrumented Impact Energy @ peak, 23°C	3	J	ASTM D 3763
Multiaxial Impact	1	J	ISO 6603
Instrumented Impact Total Energy, 23°C	3	J	ASTM D 3763
Izod Impact, unnotched 80104 +23°C	22	kJ/m²	ISO 180/1U
Izod Impact, notched 80104 +23°C	4	kJ/m²	ISO 180/1A
THERMAL	Value	Unit	Standard
HDT, 0.45 MPa, 3.2 mm, unannealed	96	°C	ASTM D 648
HDT, 1.82 MPa, 3.2mm, unannealed	85	°C	ASTM D 648
HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm	95	°C	ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80104 sp=64mm	84	°C	ISO 75/Af
PHYSICAL	Value	Unit	Standard
Specific Gravity	1.12	-	ASTM D 792
Density	1.12	g/cm³	ASTM D 792
Moisture Absorption, 50% RH, 24 hrs	0.28	%	ASTM D 570
Mold Shrinkage, flow, 24 hrs	0.3 - 0.5	%	ASTM D 955
Mold Shrinkage, xflow, 24 hrs	0.5 - 0.7	%	ASTM D 955
Moisture Absorption (23°C / 50% RH)	0.41	%	ISO 62
ELECTRICAL	Value	Unit	Standard
Surface Resistivity	3.E+00 - 6.E+00	Ohm	ASTM D 257
Source GMD, last updated:05/05/2008

Processing

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.

PLEASE CHECK WITH YOUR (LOCAL SALES OFFICE) FOR AVAILABILITY IN YOUR REGION

(1) Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours
storage at 23°C/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded
samples. All samples tested under ISO test standards are prepared according to ISO 294.

(2) Only typical data for selection purposes. Not to be used for part or tool design.

(3) This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.

(4) Internal measurements according to UL standards.

Other related products we recommend:

For more information please download the datesheet
	S-Plastics Stat-kon AD000Z.pdf

Get The Latest Quotation

First-level distribution source in South China

Reduce procurement costs, improve supply stability,

Help you find the most suitable engineering plastic materials

Click to consult and get the latest quotation within 24 hours!